ISO 15118-9:2022

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٢٤ نوفمبر ٢٠٢٢

Road vehicles — Vehicle to grid communication interface — Part 9: Physical and data link layer conformance test for wireless communication

ملفات الوثيقة ISO 15118-9:2022

الإنجليزية 72 صفحات
الإصدار الحالي
90.07 BHD

مجال الوثيقة ISO 15118-9:2022

This document specifies conformance tests in the form of an abstract test suite (ATS) for a system under test (SUT) implementing an electric-vehicle or supply-equipment communication controller (EVCC or SECC) with support for WLAN-based high-level communication (HLC) according to ISO 151188 and against the background of ISO 15118-1. These conformance tests specify the testing of capabilities and behaviours of an SUT, as well as checking what is observed against the conformance requirements specified in ISO 151188 and against what the implementer states the SUT implementation's capabilities are.

The capability tests within the ATS check that the observable capabilities of the SUT are in accordance with the static conformance requirements defined in ISO 151188. The behaviour tests of the ATS examine an implementation as thoroughly as practical over the full range of dynamic conformance requirements defined in ISO 151188 and within the capabilities of the SUT (see NOTE below).

A test architecture is described in correspondence to the ATS. The abstract test cases in this document are described leveraging this test architecture and are specified in descriptive tabular format for the ISO/OSI physical and data link layers (layers 1 and 2).

In terms of coverage, this document only covers normative sections and requirements in ISO 151188. This document can additionally refer to specific tests for requirements on referenced standards (e.g. IEEE, or industry consortia standards, like WiFi Alliance) as long as they are relevant in terms of conformance for implementations according to ISO 151188. However, it is explicitly not intended to widen the scope of this conformance specification to such external standards, if it is not technically necessary for the purpose of conformance testing for ISO 151188. Furthermore, the conformance tests specified in this document do not include the assessment of performance nor robustness or reliability of an implementation. They cannot provide judgments on the physical realization of abstract service primitives, how a system is implemented, how it provides any requested service, nor the environment of the protocol implementation. Furthermore, the abstract test cases defined in this document only consider the communication protocol and the system's behaviour defined ISO 151188. The power flow between the EVSE and the EV is not considered.

NOTE       Practical limitations make it impossible to define an exhaustive test suite, and economic considerations can restrict testing even further. Hence, the purpose of this document is to increase the probability that different implementations are able to interwork. This is achieved by verifying them by means of a protocol test suite, thereby increasing the confidence that each implementation conforms to the protocol specification. However, the specified protocol test suite cannot guarantee conformance to the specification since it detects errors rather than their absence. Thus, conformance to a test suite alone cannot guarantee interworking. Instead, it gives confidence that an implementation has the required capabilities and that its behaviour conforms consistently in representative instances of communication.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 2055-1:2016
GSO 2055-1:2015 
لائحة فنية بحرينية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO/IEC 23009-9:2025
 
مواصفة قياسية دولية
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 9: Redundant encoding and packaging for segmented live media (REaP)
ISO/IEC TR 27599:2025
 
مواصفة قياسية دولية
Information technology — Brain-computer interfaces — Use cases
ISO 4517:2025
 
مواصفة قياسية دولية
Physical vapor deposition (PVD) coatings — Contact angle measurement of metallic hydrophobic PVD coatings
ISO 15237:2025
 
مواصفة قياسية دولية
Coal — Determination of total mercury